Oxygen-Enrichment

PRODUCTS / AQUACULTURE EQUIPMENT / Oxygen-Enrichment

For aquaculture with a higher oxygen demand than can be achieved with aerators, pure oxygen must be run into the tanks. By using oxygen equipment together with LINN oxygen supplement, it is possible to reduce operating costs and increase efficiency. Check out the selection below or in the brochure from Linn here.

Loxy

Floating oxygen enricher for fish tanks, with connection for oxygen hose
Clogging free
Motor available in sizes 0.37kW or 0.55kW – 230/400VAC
Comes with 20m cable and load protection
Oxygen addition 16L/min or 25L/min *

OXYPLUS

Floating oxygen enricher (not 0.10kW) for fish tankers, with connection for oxygen hose
Minimum depth 0.90m, 0.60m or 0.70 m *
Available with 2-3 mm, 5.5 mm or 9.5 mm frame (Stainless)
Stainless steel motor 
Comes with an oxygen flow meter
Motor available in sizes 0.10 kW, 0.25 kW, 0.55 kW or 0.75 kW – 230/400 V
Comes with 10m cable
Water flow 17m3/h, 50m3/h, 110m3/h or 150m3/h *
Oxygen addition 4L/min, 9L/min, 17L/min or 25L/min *

OXYPLUS gravity

Oxygen enricher, for fish tankers, with oxygen hose connector
Needs a very small pressure difference to operate and does not require a separate pump
Controls how much water passes through the overflow 
The reduction in oxygen content may be at least 50cm, 60cm or 90cm **
Water flow 17m3/h, 50m3/h, 115m3/h or 150m3/h **
Oxygen addition 4L/min, 9L/min, 17L/min or 25L/min **

OXYJET

Solid oxygen supplements for fish farms or ponds are suitable where the water is recycled
Special mixers that oxygenate the water
Controls how much water passes through the overflow
Minimum water flow 7.2m3/h, 14.4 m3/h, 54 m3/ h, 108 m3/ hour or 162 m3/h *
Oxygen addition 1.5L/min, 3L/min, 10L/min, 20L/min or 30L/min **

* Depends on motor size
** Depends on type